FEATURES
Switching Power Modules for PCB Mounting
Fully Encapsulated Plastic Case
Universal Input Range 90-264VAC, 47-440 Hz
Regulated Output
Low Ripple and Noise
High Efficiency
Isolation class II
UL60601-1 / IEC60601-1 / EC60601-1 Medical Safety Approvals
2-Years Product Warranty
Input Specifications
Voltage ： 90-264 VAC or 100-375 VDC
Frequency (Hz) ：47-440 Hz
Current (Full load) ：220 mA max. (115 VAC) / 118 mA max. (230 VAC)
Inrush current (<2ms) ：10 A max. (115 VAC) / 20 A max. (230 VAC)
Leakage Current ：0.1 mA max. (115 VAC) / 0.2 mA max. (230 VAC)
External fuse (recommend)： 2.0 A slow blow type
Output Specifications
Voltage (V.DC.)：17V
Current (mA) max：882mA
Voltage set accuracy：±2%
Line regulation (Max..)：±0.5%
Load regulation (0-100%) (Max)：±1%
Minimum load：0%to25%
Maximum capacitive load ：330-23,000uF depending on model
Ripple & Noise： 1% of Vout
Hold-up time ：20 ms min.
Switching frequency ：132 kHz
Protection Specifications
Over current protection： Above 105% rated output power
Over voltage protection： Zener diode clamp
Short circuit protection: Hiccup mode, indefinite (automatic recovery)
OTP : 100℃
Isolation Specifications
Input-Output (V.AC) ：4000V
Environment Specifications
Operating temperature： -25℃+70℃(Case Temperature max. +95℃)
Storage temperature： -40℃+100℃
Temperature coefficient ：0.01%℃
Humidity：95% RH
MTBF ：200,000 h~400,000 h @ 25℃
Physical Specifications
Dimension (L x W x H) 2.52 x 1.79 x 0.92 Inches ( 64.0 x 45.6 x 23.5 mm ) Tolerance±0.5 mm
Case Material Plastic resin + Fiberglass (flammability to UL 94V-0)
Weight 120 g
Cooling method : Free air convection
Safety & EMC Specifications
Safety Approvals: UL60601-1 / IEC60601-1
approval : cUL / UL / CB
EMI / PFI conducted: EN 55011 class B
EMC Standards: EN60601-1-2
ESD Susceptibility : EN60601-1-2
Radiated Susceptibility: EN60601-1-2
EFT / Burst : EN60601-1-2
Surge: EN60601-1-2
Conducted Susceptibility: EN60601-1-2
1. All specifications valid at nominal input voltage, full load and +25℃after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1 uF & 47 uF parallel capacitor.