自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>OM-ESW-105-POE
OM-ESW-105-POE

OM-ESW-105-POE

分  类：其它

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：OM-ESW-105-POE

相关行业：

发布时间：2019-12-19 17:59 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Compact, Space Saving Package
    • Full IEEE 802.3 and 802.3af Compliance
    • Five 10/100BaseTX RJ-45 Ports (4 PoE Ports)
    • Unmanaged Operation
    • Automatic Detection of Connected PoE Devices
    • Support for Full/Half Duplex Operation
    • Auto-Sensing Duplex, Speed, and MDIX
    • Up to 1.0 Gb/s Maximum Throughput
    • Full Wire Speed Communications
    • Supports 15.4 Watts Per Port (13 Watts at the PD)
    • Redundant Power Inputs (46 to 49 Vdc)

      • The OM-ESW-105-POE unmanaged industrialEthernet Switch is designed to transmit power, alongwith data, over an Ethernet network and is ideal forPoE capable devices where running an AC power feedis either not possible or cost effective. This featureallows an end user to power a PoE camera, wirelessaccess point, or any other PoE capable device withoutthe need for running separate wires for power. Thisalso allows the ability for a centralized battery backupfor all these devices.Designed to meet the most demanding industrialcommunications requirements by providing highthroughput and minimum downtime while alsoproviding power to PoE capable devices over theEthernet network.

      The OM-ESW-105-POE provides five RJ-45 autosensing 10/100 BaseTX ports. All ports are full/half duplex capable, using “state of the art” Ethernetswitching technology. Four of the five RJ-45 ports alsoact as PoE ports allowing power to pass through fourof the eight strands of CAT5 cable. Each PoE portsupports up to 15.4 watts of power. TheOM-ESW-105-POE auto-negotiates the speed andflow control capabilities of the five TX port connections,and configures itself automatically.The OM-ESW-105-POE also supports up to 2000MAC addresses, enabling these products to supportextremely sophisticated and complex networkarchitectures.

      The OM-ESW-105-POE automaticallydetects any PoE device that is connected and powersit accordingly. If a PoE fault is detected on a specificport the Auto-disconnect feature disables PoE poweron that port, allowing only data communications topass. This reduces reducing the risk of damagingcostly equipment.This ideal candidate provides data and power towireless LAN access points, network cameras,VoIP, and other PoE capable devices. The productalso helps reduce costs by eliminating the need forelectrical wiring and electrician expenses.

      The OM-ESW-105-POE has extended operatingenvironmental specifications to meet the harsh needsof the industrial environment. For cost savings andconvenience it can be DIN-rail mounted alongsideEthernet I/O or other industrial equipment. To increasereliability, this switch provides dual redundant powerinputs. Two power LED’s are also provided on this unitindicating a valid power source on both the redundantpower inputs and also indicating when a power faultbus occurs.

      Specifications
      ELECTRICAL
      Input Voltage: 46 to 49 Vdc
      Steady Input Current Under Full Load: 1.6 A@48V
      Steady Input Current with No PoE, Switch Full Load: 65mA@48V
      Inrush: 26Amp/1.3ms@48V

      ENVIRONMENTAL
      Operating Temperature: -40 to 85°C (-40 to 185°F)
      Storage Temperature: -40 to 85°C (-40 to 185°F)
      Operating Humidity: 10 to 95% (non condensing)
      Operating Altitude: 0 to 3048 m (0 to 10,000')

      RELIABILITY
      MTBF: >2 million hours

      NETWORK MEDIA
      10BaseT: >Cat3 cable
      100BaseTX: >Cat5 cable

      CONNECTORS
      10/100BaseTX+PoE: Four RJ-45 TX/PoE Copper Ports
      10/100BaseTX: One RJ-45 TX Copper Port

      RECOMMENDED WIRING CLEARANCE
      Front: 5.08 cm (2")
      Top: 2.54 cm (1")
      Status LEDs: Link/activity, POE, power fault
      Case Dimensions: 9.7 H x 3.8 W x 9.0 cm D(3.5 x 1.5 x 3.6")
      Weight: 0.3 kg (0.7 lbs)
      Enclosure: Hardened metal, DIN rail mount
      DIN-Rail: 35 mm
      See PDF for detailed dimension information.

      REGULATORY APPROVALS
      FCC Title 47 Part 15 Class A; ICES-003- Class A
      CE: EN61000-6-2,4: EN61000-4-2,3,4,5,6 EN55011
      UL Listed: (US and Canada)
      per ANSI/ISA-12.12.01-2000, Class I, Div 2, Groups A,B,C,D,T4A;
      GOST-R Certified; RoHS Compliant
      Designed to comply with:
      IEEE 1613 for Electric Utility Substations and NEMA
      TS1/TS2 for Traffic Control Equipment



















    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!