当前位置：自动化网>Omega工业测量（中国）门户>产品中心>FMG800 Series

FMG800 Series

分类：其它

品牌：欧米茄

厂商：Omega工业测量（中国）

型号：FMG800 Series

最新产品

产品详情

参数

包装

No Moving Parts
Minimal Straight Pipe Required
Battery Powered
Built-In Rate and Total Indicator
Corrosion Resistant
Pulse Output (FMG810 Only)
US Gallons Pre-Programmed
(Other units available)

The FMG800 Series is a full-bore,plastic-bodied electromagneticflow meter designed for flow andusage monitoring applications in1, 2 and 3 inch pipe. Thepolypropylene flow tube offerscorrosion resistance to a widerange of chemicals and fertilizers.It is light weight and easy toinstall or remove from the pipefor inspection*.

With no moving parts, the magmeterpermits unobstructed flow, minimizingflow disturbances and straight piperequirements. The FMG800 Seriescan be used in piping configurationswhere there is little space betweenthe meter and an elbow or valve.The FMG800 Series is resistant towear from sand and debris found inground or surface water. Since thereare no bearings or propeller to wearout, maintenance and repair costsare kept to a minimum and ittolerates high flows without damage.A hinged polyethylene cover isincluded that protects from dust andUV rays, while permitting easyaccess to the flow rate and totaldisplay. Flow rate and total can bedisplayed in a variety of units, but must be factory programmed.

The FMG800 Series is used fortracking flow rate and total flow inusage monitoring applicationsincluding wells, industrial wastewater,heap leach mining discharge, coolingtower deduct, turf, landscape,and other water reclamationapplications. In the event of DC powerloss, or when changingbatteries, the FMG800 will retaininternal settings and flow total.

The FMG810 Series is externallypowered via a 5-pin connector cablewhich also provides pulse output foruse with a variety of Omega displaysand controls for remote reading, datalogging, pulse-to-analogconversion, and telemetryapplications.

The FMG800 Series (FMG801-803) is a battery-operatedunit for use when pulse outputis not required. The batteries are userreplaceable with anapproximate 1 to 2 year lifedepending on usage.
*Includes Omega NPT fitting kit on2 and 3" models.

Specifications
Pipe Size: 1, 2 or 3" full port
Fittings: 1 NPTF, 2 or 3" flange clamps with 2 or 3 NPTF fitting kit
    Metric (BSP) fittings optional
Pressure: 150 psi or 10.3 bar working pressure @ 21°C (70°F)
Operating Temperature Range: -12 to 54°C (10 to 130°F), -40 to 80°C (-40 to 176°F) non-operating
Accuracy: ±1% of reading (between 10% and 100% of max flow) ±3% of reading (between cutoff and 10% of max flow)
Flow Range Minimum:
    1": 2.3 GPM (0.145 LPS)
    2": 6 GPM (0.38 LPS)
    3": 14 GPM (0.88 LPS)
Flow Range Maximum:
    1": 110 GPM (6.94 LPS)
    2": 300 GPM (18.9 LPS)
    3": 670 GPM (42.3 LPS)
Materials Body: Glass-filled polypropylene
Electrodes: 316 stainless steel
Electronics Housing: Die-cast aluminum, powder-coated
Display Cover: Polyethylene
Display Digits: Rate-6, Total-8
Units Rate: Gallons/Minute, Cubic Feet/ Second, Acre-Feet, Acre-Inch, Gallons, Gallons x 1000, Cubic Feet/Minute, Liters/Second
Units total: Cubic Feet, Liters, Mega-liters, Cubic Metersm Liters/Minute, Cubic Meters/Minute
Power:
    FMG810: 10 to 30 Vdc @ 60 mA max (15 mA average)
    NOTE: Using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
    FMG801/802/803: 6 each “AA” alkaline cells (included), replaceable. Estimated life is 1 to 2 years depending on usage
Pulse Output (FMG810 Only):
    Signal: Current sinking pulse, opto-isolated, 32 Vdc max at 10 mA max
    Standard Pulse Rate: 1 unit/pulse out, pulse width of 10 ms depending on unit selection
High Frequency (-HF): Pulse width 1.1 ms, min/max frequency, 3 to 150 hz
    Pulse/Unit: 1" = 80, 2" = 30, 3" = 13
Empty Pipe Detection: Hardware/ software, conductivity-based
Conductivity: >20 micro Siemens/cm
Environmental: NEMA 4X standard
Electrical Connection (FMG810 Only): 5-pin male circular with 6 m (20') cable

For a complete list of displays in alternate Engineering Units consult the full specification page via the link "Specs" above.

暂无内容提供

联系方式

中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。

公司名称：Omega工业测量（中国）
联系人：王先生
联系电话：02161973664
手机号：
传真：
电子信箱：kevin.wang@cn.omega.com
公司网站：http://cn.omega.com
公司地址：上海市宜山路1698号102单元

留言反馈

评价：
- 1
- 2
- 3
- 4
- 5
关于：
联系人：
联系电话：
联系邮箱：
需求意向：
验证码：
看不清楚？

网友反馈

王莹: 在2021/5/22 11:20:43留言
留言内容: 产品名称：热电偶规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
柴宾: 在2019/6/25 14:33:54留言
留言内容: 实验室用
万: 在2017/7/25 16:01:36留言
留言内容: 压差传感器：50psi，px409-050dwu5v 1只压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
袁先生: 在2017/4/10 14:46:33留言
留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
王沛: 在2016/8/28 19:30:28留言
留言内容: 购买温度记录器和热电偶

FMG800 Series

最新产品

联系方式

产品分类

热门产品

Omega RH87 多功能环境测量仪

DPG210-KIT

omegaBSJ-K挡片罩

旋转选择开关

OMEGA高精度无线RTD温度计

OMEGA工业级红外线温度计

热电偶接线端子

网友反馈