SYS/FTBG-100 Series

SYS/FTBG-100 Series

分  类:其它

品  牌:欧米茄

厂  商:Omega工业测量(中国)

型  号:SYS/FTBG-100 Series

相关行业:

发布时间:2019-12-19 17:38 浏览人数:

最新产品

产品详情
参数
包装
  • Outstanding Accuracy
  • Hybrid Ceramic Bearings for Superior Life
  • DC or AC (Optional) Power
  • Pulse and Analog Output
  • Optional Hi and Lo Alarms
  • Factory Configured
  • Windows® Configuration Software (Included)
  • Nist Certificate Standard

  • OMEGA’s high accuracy GasTurbine Series measures thevolumetric flow of gas through apipeline. Gas flowing through themeter turns the turbine rotor at anangular velocity which isproportional to the velocity of thegas being measured. As theturbine rotor turns, the rotor bladespass a non-intrusive pickup coil thatgenerates an electrical signal,referred to as a pulse. Each pulserepresents a specific volume of gas(i.e. ACF/AM3). The totalization of thesepulses results in the total volumetric flow. The totalvolume can be converted to mass flow total (SCF orNM3) using reference conditions and base density, orby applying various correction techniques.Standard calibrations for these gas turbine systemsare performed at a reference density of 0.1 lb/Ft3. A10-point calibration certificate (traceable to NIST orother recognized national laboratory) is supplied witheach meter. Standard calibration includes a calculatedK-factor for gas that is derived from a 10-point NISTcalibration for water. Calibrations at customer’s actualoperating densities can be performed with specialorder.OMEGA’s gas turbine flowmeters offer high accuracymeasurement of gases for a wide variety of applications,including fiscal measurement, plant cost allocation,energy consumption/conservation, etc. These gasturbine systems are suitable for all non-corrosivegases such as natural gas, air and nitrogen. Specialversions of this series are available for use oncorrosive gases, such as “off-gas” and feature NACEMR175trim and self-lubricated ceramic ball bearings.Contact OMEGA for further details.An OMEGA™ gas turbine flowmeter should be chosenso that it is operated within its most accurate range.The capacity of a turbine flowmeter is based on theactual volumetric flow rate and is expressed as actualcubic feet (ACF) or actual cubic meters (AM3). Thelower limit of operation is a function of the gas densityand velocity.

    SPECIFICATIONS (TURBINE)
    Over-range: 150% of maximum flow (intermittently)
    Turn Down Range: Dependent on gas density at user’s operating conditions
    Linearity: ±1% of reading typical
    Repeatability: ±0.25% over tabulated repeatable range
    Available Temperature Range: -157 to 149°C (-250 to 300°F) continuous
    End Fittings (Standard): NPT
    Bearing Styles: Self-lubricating, ceramic hybrid ball bearings
    Materials: 316/316L dual rated stainless steel with 17.4 pH rotor

    SPECIFICATIONS (SIGNAL CONDITIONER)
    Input Signal Type: MCP pickup
    Input Frequency Range: 0.2 Hz to 4 KHz
    Signal Level: 10 mV rms to 30 Vdc
    Power Supply: 13 to 30 Vdc standard, 100 to 240 Vac (-AC) (optional), reverse polarity protection
    Analog Output: 4 to 20 mA, 1 to 5V, 24 mA overflow condition (dip switch selectable)
    Load Resistance: Max 650 Ù @ 24 Vdc
    Accuracy: °0.02% of full scale
    Temperature Drift: 40 ppm/°C
    Pulse Output: 0 to 5V Recommended Minimum Load
    Resistance: 50 KÙ
    Pulse Scaling: Divide by 1,10,100 per flow unit of measure
    Hi/Lo Alarm (Optional): Relay (2A, 30 Vdc), 0 to 5V, open collector (0.5A, 30V)
    Communications: RS232 port for configuration and diagnostics
    Linearization: Up to 20 points
    Operating Temperature: -40 to 85°C (-40 to 185°F)
    Humidity: 0 to 90% non-condensing
    Enclosure: Extruded aluminum explosion-proof ATEX
    Port: 3/4-14 NPT
    Regulatory: CE compliant































暂无内容提供
暂无内容提供

联系方式

中国自动化网安全提示,在购买供应商商品时,请一定要先审核好企业信息是否真实,谨防网上诈骗。
公司名称:Omega工业测量(中国)
联系人: 王先生
联系电话:02161973664
手机号:
传 真:
电子信箱:kevin.wang@cn.omega.com
公司网站:http://cn.omega.com
公司地址:上海市宜山路1698号102单元
留言反馈
  • 评价:

  • 关于:

  • 联系人:

  • 联系电话:

  • 联系邮箱:

  • 需求意向:

  • 验证码:

    看不清楚?

  • 在线咨询
X
下载企业APP

成为企业会员免费生成APP!