自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>FTB-200 Series
FTB-200 Series

FTB-200 Series

分  类：其它

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：FTB-200 Series

相关行业：

发布时间：2019-12-19 17:37 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • ±0.5% of Reading Accuracy
    • Ball Bearing Design for Economy
    • Deflector Cones Stabilize Low Mass Rotor for Increased Bearing Life
    • NIST Certificate for Water Included

      • OMEGA™ FTB-201 Series turbine meters have male flared-end fittings for easy connections. They are built to meet the performance requirements of MS 33656, though they do not carry a militaryspecification. These units come with a mating 2-wire connector and can be supplied with the integrallymounted signal conditioners (Please see the FLSC-18B Series for more information) to provide 4 to 20 mA, 0 to 5V, and factored pulse outputs.

      Flow Straightening
      Proper application of a turbine flowmeter requires that there be a suitable piping section both downstream and upstream of the meter if it is to achieve optimum accuracy.Whereas an inlet straight pipe run of 10 pipe diameters and an outlet straight pipe run of 5 pipe diameters provide the necessary flow conditioning in general, some applications require an upstream flow straightener.Such applications include custody transfer.A flow straightener consists of a section of piping which contains a suitably dimensioned and positioned thin walled tube cluster to eliminate fluid swirl.(see full specifications for "Typical Turbine Meter Installation Drawing".

      37° Flare Installation Kits
      Installation kits with the required up and downstream straight pipe lengths for proper turbine operation are available.Installation kits for turbine meters with 37° flare end fittings consist of two lengths of stainless steel tubing cut to a length appropriate for the upstream and downstream straight pipe runs and flared at one end.Mating sleeves and nuts are included.The kits can be conveniently butt-welded into the piping system.Flow straightening sections may be provided with the installation kit. Kits are available in tubing sizes from ½ to 2 ½".

      Strainers and Filters
      Turbine meters are intended for clean fluid service only; where there is any doubt concerning possible particulate impurities in the process fluid, strainers are recommended.A strainer/filter may be required to reduce the potential hazard of fourling or damage that can be caused by foreign matter.Pipe rouge, the extremely fine rust which develops on the inside of some piping, is a serious problem for turbine meters, due to the difficulty in filter out these particles.Consult Omega Flow Engineering Department for applications that may entail pipe rouge.

      When using FTB-200 Series units for fluids with viscosities other than 1 centistoke, special calibrations and universal viscosity curves are available, consult OMEGA’s Flow Engineering Department for quote.


      Meter SizeMesh SizeMaximum Partical Size (in)
      1/4 to 1/2"1000.0055
      5/8 to 1 1/4" 70 0.008
      1 1/2 to 2 1/2"400.015



      SPECIFICATIONS
      Accuracy: ±0.5% of reading
      Repeatability: ±0.1% of reading
      Temperature Range: -268 to 232°C (-450 to 450°F)
      Maximum Intermittent Overrange: 150% of maximum range
      Materials of Construction:
         Body: 304 SS;
         Rotor: 17-4 PH SS
         Bearings: 440C SS
      Installation Kits: 340 SS, 1.7 mm (0.065") thick
      Electrical: Two-wire connector, included
      Max Pressure Drop: 0.34 bar (5 psi)

      Model No.37° Flare
      Fitting Size      		Linear Range
      Water      		Max
      Operating Pressure      		LengthNominal
      K-Factor
      pulses/gal      		Weight
      kg (lb)
      FTB-2013/4-16 UNF-3A0.35 to 3.5 GPM5000 psi62 mm (2.45")13,0000.4 kg
      (1 lb)
      FTB-2023/4-16 UNF-3A0.75 to 7.5 GPM5000 psi62 mm (2.45")10,0000.4 kg
      (1 lb)
      FTB-2033/4-16 UNF-3A1.25 to 9.5 GPM5000 psi62 mm (2.45")6,0000.4 kg
      (1 lb)
      FTB-2047/8-14 UNF-3A1.75 to 16 GPM5000 psi70 mm (2.75")4,1000.4 kg
      (1 lb)
      FTB-2051-1/16-12 UNF-3A2.5 to 29 GPM5000 psi83 mm (3.25")2,2000.4 kg
      (1 lb)
      FTB-2061-15/16-12 UNF-3A4 to 60 GPM3500 psi89 mm (3.50")6400.9 kg
      (2 lb)
      FTB-2071-5/8-12 UNF-3A6 to 93 GPM3000 psi99 mm (3.88")4100.9 kg
      (2 lb)
      FTB-2081-7/8-12 UNF-3A8 to 130 GPM2250 psi111 mm (4.38")2301.4 kg
      (3 lb)
      FTB-2092-1/2-12 UNF-3A15 to 225 GPM1750 psi121 mm (4.75")1201.8 kg
      (4 lb)


























    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询