自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>FP-5200 and FP-3
FP-5200 and FP-3

FP-5200 and FP-3

分  类：其它

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：FP-5200 and FP-3

相关行业：

发布时间：2019-12-19 17:37 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Stainless Steel Paddle Wheel Sensors
    • Boiler Water Feed Lines
    • Turbine Steam Condensate
    • Energy Management Systems, HVAC


      • ACCURACY THAT PAYS OFF
      In the FP-5200 sensor housing, a magnet is surrounded by a coil, creating a magnetic field. As the liquid flow causes the rotor to spin, each blade passing this coil concentrates the lines of magnetic force, producing a repeatable AC sine wave output. The FP-5200 also features OMEGA’s patented "open-cell" rotor, for increased linearity at ±1% over the full dynamic range of 1.6 to 20 fps, with negligible head loss.

      COMPATIBLE, VERSATILE INTERFACING
      The FP-5200 is completely compatible with FPM Series powered flow indicators, controllers, and totalizers, to give increased flexibility in system design. It also interfaces easily with digital computers and with a variety of other external equipment.

      FP-5200 FLOW SENSOR
      When you're looking for the added strength of an all-metal flow sensor, make it the FP-5200. It permitsthe high degree of accuracy and reliability you demand, without added cost. Compare it to traditional metal flowmeters, where the price increases dramatically with pipe size. In contrast, you can install the FP-5200 insertion flow sensor in pipe sizes ranging from ½ to 12" without a lot of additional cost, because the sensor price increases only slightly for larger pipe sizes. Furthermore, it's accurate to ±1% of full scale. Installation is easy. Use the FP-5200 locally, or in a remote area up to 100 feet from the meter or controller without signal amplification. It needs no external power or battery. Just one operator, simple tools, an FP-5200 Flow Sensor, a few minutes . . . and you're on-line. Additionally, the all-stainless-steel flow sensor accurately measures a wide variety of fluids, even under high pressure and temperature conditions [pressures up to 1500 psi, temperatures up to 150°C (300°F)].

      Flow Range
      Pipe
      Size      		½"¾"1"1¼"1½"2"2½"3"4"5"6"8"10"12"
      Range
      (gpm)      		1.6
      to
      19      		2.7
      to
      34      		4.4
      to
      54      		7.4
      to
      94      		10.1
      to
      127      		16.8
      to
      210      		24
      to
      300      		37
      to
      461      		63
      to
      794      		100
      to
      1247      		144
      to
      1801      		250
      to
      3119      		393
      to
      4915      		559
      to
      6977


      SPECIFICATIONS
      Output Signal: Sine wave
      Output Frequency: 12 Hz per ft/sec, 80 mV peak-to-peak per fps nominal
      Flow Rate Range: 1.6 fps to 20 fps
      Output Amplitude: 5 to 8 mV/P-P/Hz
      Source Impedance: 10 kΩ
      Accuracy: ±0.2 fps
      Linearity: ±1% of full range
      Repeatability: ±0.5% of full range
      Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity
      Materials: Rotor: CD4MCU SS; Rotor Housing: 316 SS; Rotor Shaft: Tungsten Carbide; Transducer Body: 347 SS; Top Flange: 316 SS; Cap 316 SS
      Rotor Bearing: Fluoroloy B (PTFE-based fluoroplastic)
      Cable Length: 7.5 m (25'), can be extended up to 30 m (100') with copper wire
      Maximum % Solids: 10%, with particulate size not exceeding 5 mm cross section or length
      Weight: 0.9 kg (2 lb)

      METAL HOT-TAP FLOW SENSOR
      The metal hot-tap sensor allows the user easy sensorinstallation and removal without shutting down theprocess stream. Compatible with Mueller drillassemblies, this new hot-tap sensor can be quicklyinstalled into pipe sizes from 1½ to 24". This hot-tapassembly is compatible with any 1½ NPT female pipefitting such as weldolets and saddles. Installationfitting not supplied.

      SPECIFICATIONS
      Flow Range: 0.3 to 20 fps
      Wetted Parts: 316 and CD4MCU stainless steel; FKM and PEEK
      Power Input: 5 to 24 Vdc @ 10 mA max
      Max. Pressure/Temperature: 82°C (180°F) up to 250 psig








    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!