自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>FSW-6000 and FSW-7000 Series
FSW-6000 and FSW-7000 Series

FSW-6000 and FSW-7000 Series

分  类：流量计

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：FSW-6000 and FSW-7000 Series

相关行业：

发布时间：2019-12-19 17:21 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Simple to Install and Low Cost
    • No Moving Parts-Maintenance Free Reliability
    • Optimal Temperature Compensation — Unaffected by Temperature Gradient
    • Can Operate in Temperatures up to 120°C (248°F) with Sanitary Option
    • Have a Maximum Working Pressure of 4,300 PSI (300 bar)
    • Chain of 8 LEDs- Integrated Flow Rate/Setpoint Indication
    • Can Be Used as a Level Switch

      • The FSW-6000/7000 Series arethermal flow switch monitorsdesigned to monitor flow status andalso used to detect level of liquids,air and gas. A chain of 8 LED’sgives the user a visual indication ofthe flow rate. In addition, there isalso a dichromatic LED, whichshows the switch point status of theunit. The sensing element andconnection of the FSW-6000/7000Series are made with 316 SS.The standard enclosure isglass-filled nylon and is alsoavailable in an aluminum enclosurefor hazardous environments. TheFSW-6000/7000 Series can bemade with a great variety ofprocess connections such asthreaded, flange, or sanitary.

      The FSW-6000/7000 Series line ofthermal flow switch monitors isbased on the principle of thermaldispersion. A typical configurationuses two platinum ResistanceTemperature Detectors (RTD’s) setwithin the tip of the sensor. One RTDis heated a few degrees above thetemperature of the medium and theother RTD is used as a reference,sensing the actual processtemperature. The second RTD alsomonitors the temperature of themedium, as any changes intemperature must be compensatedfor in the first RTD. As the processmedium flows over the tip of thesensor it disperses some of theheat from the first RTD. Thetemperature change between thetwo RTD's signals the probe’selectronics and the switch changesstate once the set point hasreached.

      The FSW-6000/7000 Series maybe installed in a pipe or tank usingthe thread or connection provided.Use only the hexagon whentightening to achieve a seal, do notuse the body. The body should berotated after tightening to leave thecable gland in suitable orientation.The FSW-6000/7000 Series is notaffected by its fixing position so itmay be installed at any anglearound the pipe. However, it isrecommended that with horizontalpipe runs the sensor should beinstalled on the side, into the middleof the pipe. In vertical pipes, theFSW-6000/7000 Series should beinstalled when there is flow in anupward direction against gravity.Care should be taken wheninstalling the sensor that the probeextends clear of the pipe’s internalwall and is fully immersed into theflow. In pipes with smallerdiameters, some care should alsobe taken so that the sensor is notscrewed too far into the line.

      SPECIFICATIONS
      Accuracy: ±10% of setpoint
      Repeatability: ±1% of setpoint
      Power Supply:
          FSW-6000: 85 to 240 Vac (50/60 Hz)
          FSW-7000: 24 Vdc ±10%
      Temperature Range:
          Process: -20 to 80°C (-4 to 176°F) [sanitary option to 120°C (248°F) for CIP]
          Operating: -20 to 60°C (-4 to 140°F)
      Max Pressure: 300 bar (4351 psi)
      Protection Class: NEMA 4 (IP65)
      Wetted Materials: 316 SS
      Enclosure Material: Glass filled nylon standard or aluminum die cast option
      Process Connection: ½ to 1½ NPT, Tri-Grip™, or flange (others available, consult Flow Engineering Department)
      Output: 250 Vac SPDT 5 A relay
      Switch Point Adjustment: Potentiometer
      Bargraph:
          Green LED: Flow rate above setpoint
          Yellow LED: Flow is at above setpoint
          Red LED: Flow is below setpoint
      Switch Point Status:
          Red LED: No flow
          Green LED: Flow
      Response Time: 1 to 10 seconds
      Max Start up Delay: 12 seconds
      Switching Range: 3 cm/s to 3 m/s (0.09 to 9.84 ft/sec) (liquid), 5 cm/sec to 15 m/sec (0.16 to 49 ft/sec) (gas)
      Dimensions:
          Nylon Head: 88 Dia x 80 mm H (3.5 x 2.5" H)
          Aluminum Head: 88 Dia x 108 mm H (3.5 x 4.25")
          Insertion Length: 13⁄8, 2 and 3" standard, for other lengths consult Flow Engineering
           Maximum insertion Length is 36"

          Weight: Approx 680 g (1.5 lb)


    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!