自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>HBM-M-Series
HBM-M-Series

HBM-M-Series

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：HBM-M-Series

相关行业：

发布时间：2019-12-19 16:54 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • High Resistance to Alternating Loads
    • High Temperature Range 300°C (572°F)
    • Wide Spectrum of Different Types

      • M Series strain gauges have been specially developedfor high resistance to alternating loads at increasedstrain levels and high temperatures up to 300°C(572°F). They are foil strain gauges with measuring gridsmade of a special nickel-chromium alloy. OMEGA/HBMoffer this special strain gauge with various geometries,measuring grid lengths and temperature responsematching.

      New materials offering high strength such as fibercomposites pose a major challenge for strain gaugesused for measurements specifically when pushingcomponents to their mechanical limit of performance.Situations may arise where a strain gauge subjected toalternating loads at increased load levels is weakenedand fails earlier than the component under test.The M Series has been specially developed for highresistance to alternating loads and allows for testingof materials featuring high strength.

      All M Series strain gauge types are available withdifferent measuring grid lengths:
          • 1.5 mm: where space is a constraint or when highly selective measurement results are required
          • 3 mm: for inhomogeneous materials and where space is a requirement or not
          • 6 mm: for inhomogeneous materials and where space is not a requirement

      The right measuring grid length: The measuring gridlength depends on the aim of measurement, sincethe result of a measurement with strain gauges willbe determined as the average of strains. In general,measuring grid lengths of 3 to 6 mm (0.06 to 0.24")generates a better result.

      Long measuring grids are recommended where thereis an inhomogeneous material such as concrete orwood. A long strain gauge will bridge the inhomogeneityof the work piece and return the strain underneath themeasuring grid as the measurement result.

      Short measuring grids are suitable for detecting a localstrain state. Therefore, they are suitable for determiningstrain gradients, the maximum point of notch stressesand similar stresses.

      Specifications
      Strain Gage Construction–Foil Strain Gauge
      Carrier:
          Material:       Glass fiber reinforced phenolic
          Thickness: 35 ±10 µm
      Grid Foil:
          Material: CrNi
          Thickness: 5 µm
      Encapsulation:
          Material: Polyimide film
          Thickness: 25 ±5 µm
      Connections: Solder pads with strain relief
      Resistance: 350 and 1000 Ω
      Resistance Tolerance: ±0.3%(1)
      Gage Factor: Approximate 2.2 (specified on each package)
      Gage Factor Tolerance: ±1.5% (for grid length <3 mm) ±0.7% (for grid length ≥3 mm)
      Temperature Coefficient of the Gauge Factor: Specified on each package
      Transverse Sensitivity: Specified on each package
      Operating Temperature Range: -200 to 300°C (-328 to 662°F)
      Temperature Response (Ferrite Steel): 10.8 ppm/K (6.0 ppm/°F)
      Maximum Elongation:
          Positive Direction: 10,000 µm (1%)
          Negative Direction: 15,000 µm (-1.5%)
      Minimum Bending Radius: 5 mm (0.20") for linear gauges 10 mm (0.39") for stacked rosettes
      Bonding Material that Can Be Used: Z70 or EP310S
      Fatigue Life (Test to Failure):
          107 cycles at 2000 µm/m
          106 cycles at 2200 µm/m
          104 cycles at 3100 µm/m









    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!