自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>SMLA-TC
SMLA-TC

SMLA-TC

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：SMLA-TC

相关行业：

发布时间：2019-12-19 16:51 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Provides Relay Contact Closures at a Preset Temperature Input Level
    • Field Configurable Input Ranges for Type J, K, T, E, R, and S Thermocouples
    • Dynamic Deadband Prevents False Trips
    • Burnout Detection
    • Setpoints Programmable HI or LO
    • Selectable Failsafe/Latching Operation
    • Selectable 120/240 Vac Input Power

      • Model SMLA-TC of field configurable limit alarms with thermocouple input offers wide ranging inputs and flexiblesetpoint capability. It accepts six popular thermocoupletypes with inputs ranging from -270°C (454°F)to 1760°C (3200°F). The SMLA-TC provides twoindependent setpoint alarms (2 SPDT, 5A) andincludes 0.25% to 50% adjustable deadbands andselectable 120/240 Vac power.

      Model SMLA-TC is equipped with a dual functiondiagnostic LED. The green center LED indicates linepower and input signal status. Active line power isindicated by an illuminated LED. If the center LED isoff, check line power and the wiring connection. If theinput signal is above 100% full scale, the LED will flashat approximately 8 Hz. Below 0%, the flash rate isapproximately 4 Hz.

      Setpoints are top accessed multi-turn potentiometers.The field configurable SMLA-TC limit alarm setpointscan be configured for HI, LO, latching or fail-safetrip operation. Non-latching HI and LO setpointshave respective HI and LO deadbands. In a trippedcondition, the setpoint is exceeded and the appropriatered LED is lit. The trip will reset only when the processfalls below the HI deadband or rises above the LOdeadband. To reset a latched setpoint the signal mustbe in the safe region and the line power must beturned off for at least 5 seconds. For proper deadbandoperation, the HI setpoint must always be set above theLO setpoint.

      In failsafe operation, the relay is energized when theprocess is below a HI setpoint or above a LO setpoint(opposite for non-failsafe). In the failsafe mode, a powerfailure results in an alarm condition.

      The input must remain beyond the setpoint for100 milliseconds, uninterrupted, to qualify as a validtrip condition. Likewise, the input must fall outsidethe deadband and remain there for 100 millisecondsto return the alarm to an untripped condition. Thiseffectively results in a “dynamic deadband” - based ontime - in addition to the normal deadband.

      The factory default configuration for the SMLA-TCis as follows:
      Input: Type J, 0 to 360°C (32 to 680°F)
      Burn Out: Positive
      Output: Dual, SPDT
      Trip: A: HI, B: LO
      Latching: No
      Failsafe: No
      Deadband: A/B: 0.25%
      Power: 120 Vac

      When switching inductive loads, maximum relay life andtransient EMI suppression is achieved using externalprotection. Place all protection devices directly acrossthe load and minimize lead lengths. For AC inductiveloads, place a properly rated MOV across the load inparallel with a series RC snubber. Use a 0.01 to 0.1 mFpulse film capacitor (foil polypropylene recommended)of sufficient voltage, and a 47 Ω, ½ W carbon resistor.For DC inductive loads, place a diode across the load(PRV > DC supply, 1N4006 recommended) with (+) tocathode and (-) to anode (the RC snubber is an optionalenhancement).

      Specifications
      INPUT
      Ranges: Field configurable, see table
      Impedance: >1 MΩ
      Input Bias Current (Burnout Detect): <1.5 µA
      Overvoltage: ±10 V differential
      Common Mode (Input to Ground): 600 Vac or 1000 Vdc max
      LED Indications:
          Input Range (Green);
            >100% Input: 8 Hz flash
            <0% Input: 4 Hz flash
          Setpoint (Red): Tripped; Solid red (one LED for each setpoint)
      Limit Differential (Deadband): 0.25% to 50% of span
      Response Time:
          Dynamic Deadband: Relay status will change when propersetpoint/process condition exists uninterrupted
          for 100 msec
          Normal Mode (Analog Filtering): <250 msec (10 to 90%)
      Setpoint:
          Effectivity: Setpoints are adjustable over 100% of input span
          Repeatability (Constant Temp): ±0.2% for inputs > 0°C; ±0.3% for inputs < 0°C
      Stability:
          Line Voltage: ±0.01%/% max
          Temperature: ±0.05% of full scale/°C max
      Common Mode Rejection (DC to 60 Hz): 120 dB
      Isolation: 1000 Vdc between contacts, input and power
      ESD Susceptibility: Meets IEC 801-2, Level 2 (4 KV)
      Humidity:
          Operating: 15 to 95% RH @ 45°C (113°F)
          Soak: 90% RH for 24 hours @ 65°C (149°F)
      Temperature Range:
          Operating: 0 to 60°C (32 to 140°F)
          Storage: -15 to 70°C (5 to 158°F)
      Power: 120/240 Vac ± 10%, 50 to 60 Hz selectable, 2 W typical, 5 W max
      Relay Contacts: 1 SPDT (1 Form C) per setpoint
          Current Rating (Resistive):
            120 Vac: 5A
            240 Vac: 2A
            28 Vdc: 5A
          Material: Silver-Cadmium Oxide
          Electrical Life: 105 operations at rated load (external relay contact protection is required for use with inductive loads)
          Mechanical Life: 107 operations
      Latch Reset Time: 5 seconds (with power removed)
      Weight: 291 g (0.64 lb)































































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!