自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>OM-NET-1608
OM-NET-1608

OM-NET-1608

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：OM-NET-1608

相关行业：

发布时间：2019-12-19 16:50 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • 16-Bit High-Speed Ethernet Device
    • Sample Rates up to 250 kS/s
    • 4 Differential (DIFF) or 8 Single-Ended (SE) Analog Inputs
    • Two 16-Bit Analog Outputs
    • Eight Individually-Configurable Digital I/O Lines
    • One 32-Bit Counter Input
    • Includes a Built-In 10/100 BASE-T Auto-Negotiation, High-Speed Communication Port
    • Requires a TCP/IP and UDP Connection to a Network or Computer
    • Includes CAT-6 Ethernet Cable and 5V Power Supply Adaptor (Required to Provide External Power)
    • TracerDAQ® Software Included for Acquiring and Displaying Data and Generating Signals
    • Universal Library Includes Support for Visual Studio® and Visual Studio.NET, Including Examples for Visual C++®, Visual C®, Visual Basic®, and Visual Basic® .NET
    • Comprehensive Drivers for DASYLab® and NI LabVIEW™
    • InstaCal Software Utility for Installing, Calibrating, and Testing
    • Supported Operating Systems: Windows® VISTA/7/8/10 (32- and 64-Bit)

      • The Ethernet-based OM-NET-1608 data acquisition module is a low-cost, high-speed, multifunction I/O device that measures eight analog channels at 250 kS/s aggregate with 16-bit resolution. This device also offers two analog outputs, eight digital I/O channels, and one counter input.

      Ethernet Interface
      The OM-NET-1608 has a built-in 10/100 BASE-T auto-negotiation, high-speed communication port. The networking protocols are TCP/IP and UDP. Once connected to the network, the device can be remotely accessed and configured through software from anywhere on the network. Only one user at a time can access the OM-NET-1608. Software is required to actively communicate with the OM-NET-1608 over Ethernet. The device does not operate as a stand-alone data logger.

      Analog Input
      The OM-NET-1608 provides 16-bit analog inputs that are software-selectable as four differential (DIFF) or eight single-ended (SE) inputs. The device supports input ranges of ±10V, ±5V, ±2V, and ±1V that are software-selectable per channel.

      Analog Output
      The OM-NET-1608 has two 16-bit, software-paced analog outputs that can be updated at a rate of 500 S/s. The output range is fixed at ±10V.

      Trigger Input
      The OM-NET-1608 has an external digital trigger input. The trigger mode is software-selectable for edge- or level-sensitive mode. You can configure edge-sensitive mode for either rising or falling edge. In level-sensitive mode, you can configure for either high or low level. The default setting at power up is edge-sensitive, rising edge.

      Digital I/O
      Eight bi-directional digital I/O bits are individually-configurable for input or output. The digital I/O terminals can detect the state of any TTL-level input. You can configure for pull-up (5V) or pull-down (0V) with an onboard jumper.

      Counter Input
      One 32-bit event counter can count TTL pulses. The counter accept inputs of up to 10 MHz.

      Clock I/O
      The OM-NET-1608 has one external clock input and one clock output for analog inputs.

      Calibration
      OM-NET-1608 devices are factory-calibrated. Specifications are guaranteed for one year. For calibration beyond one year, return the device to the factory for recalibration.

      Software
      The OM-NET-1608 module ships with an impressive array of software, including TracerDAQ®, a full-featured, out-of-the-box data logging, viewing, and analysis application. Driver support and detailed example programs are included for Universal Library programming libraries for Microsoft® Visual Studio® programming languages, and other languages, including DASYLab®, and ULx for NI LabVIEW® (comprehensive library of VIs and example programs compatible with 32-bit and 64-bit LabVIEW 2010 or later) and InstaCal™ installation, calibration and test utility-powerful solutions for programmers and nonprogrammers alike. These modules operate under Microsoft Windows® VISTA/7/8/10 (32- and 64-bit) operating systems.

      The OM-NET-1608 data acquisition module is supplied with TracerDAQ software which is a collection of four virtual instrument applications used to graphically display and store input data and generate output signals:

          • Strip Chart—Log and graph values acquire from analog inputs, digital inputs, temperature inputs and counter inputs
          • Oscilloscope—Display values acquired from analog inputs
          • Function Generator—Generate waveforms for analog outputs
          • Rate Generator—Generate waveforms for counter outputs

      TracerDAQ PRO is an enhanced version of TracerDAQ and is available as a purchased upgrade(SWD-TRACERDAQ-PRO). A comparison of some of the features included in TracerDAQ vs TracerDAQ PRO is shown on the PDF.

      Specifications
      ANALOG INPUT
      A/D Converter Type:       Successive approximation
      ADC Resolution: 16-bits
      Number of Channels: 4 differential (DIFF)/8 single-ended (SE), software-selectable
      Input Voltage Range: ±10V, ±5V, ±2V, ±1V (software-selectable per channel)
      Absolute Max Input Voltage (CHx relative to AGND):±20V max (power on), ±12V max (power off)
      Input Impedance: 1 GΩ (power on), 1200 Ω (power off)
      Input Bias Current: ±10 nA
      Input Bandwidth (All Input Ranges, Small Signal [-3 dB]): 700 kHz
      Input Capacitance: 60 pf
      Max Working Voltage (Signal + Common Mode):
          ±10V Range: ±10.2V max relative to AGND
          ±5V Range: ±10.2V max relative to AGND
          ±2V Range: ±9.5V max relative to AGND
          ±1V Range: ±9.0V max relative to AGND
      Common Mode Rejection Ratio (fIN = 60 Hz, All Input Ranges): 86 dB
      Crosstalk (Adjacent Differential Mode Channels, DC to 10 kHz): -75 dB
      Input Coupling: DC
      Sample Rate: 0.019 Hz to 250 kHz, software-selectable
      Trigger Source: TRIG (see External Trigger)
      Sample Clock Source: Internal A/D clock or external A/D clock (AICKI pin)
      Internal Sample Clock Stability: ±50 ppm
      Internal Sample Clock Timebase: 80 MHz timer with 32-bit period (available frequencies are 80 MHz/integer period)
      Throughput: This is the typical throughput when the device and host are both connected by Ethernet to the same local network; the throughput can vary significantly if a wireless connection is involved or data is sent over the internet and is not guaranteed
          Software Paced: 1000 to 5000 S/s typ, on local network
          Hardware Paced: 250 kS/s max
      Channel Gain Queue (Up To 8 Elements): Software-selectable channel and range for each queue element
      Warm-Up Time: 15 minutes min
      Noise Performance: For the peak to peak noise distribution test, a differential input channel is connected to AGND at the input terminal block, and 16384 samples are acquired at the maximum rate available at each setting
      Settling Time: Settling time is defined as the accuracy that can be expected after one conversion when switching from a channel with a DC input at one extreme of full scale to another channel with a DC input at the other extreme of full scale; both input channels are configured for the same input range

      ANALOG OUTPUT
      Number of Channels:       2
      Resolution: 16-bits
      Output Ranges (Calibrated): ±10V
      Output Transient
          Powered On
            Duration:       5 ms
            Amplitude: 2V p-p
          Powered Off
            Duration:       400 ms
            Amplitude: 10V p-p
      Differential Non-Linearity (16-bit Monotonic): ±0.35 LSB typ, ±1 LSB max
      Output Current (AOUTx Pins): ±3.5 mA max (leave unused AOUTx output channels disconnected)
      Output Coupling: DC
      Power On and Reset State: DACs cleared to uncalibrated zero-scale: 0V, ±50 mV unless the alarm function is enabled for the output; AOUTx defaults to 0V whenever the device is powered on or a reset command is issued to the device, unless the alarm functionality is enabled for the output
      Alarm Functionality: Either or both outputs may be configured to go to defined values when an Ethernet connection with a host is established or lost
      Slew Rate: 5V/µs
      Throughput (Software Paced): 1000 to 5000 S/s typ, on local network. This is the typical throughput when the device and host are both connected by Ethernet to the same local network. The throughput can vary significantly, and typical throughput is not guaranteed if a wireless connection is involved or data is sent over the internet
      Calibrated Absolute Accuracy (Analog Output)
      Range:       ±10V
      Absolute Accuracy: (±18.7 LSB)
      CALIBRATED ABSOLUTE ACCURACY COMPONENTS (ANALOG OUTPUT)
      Range:       ±10V
      % of Reading: ± 0.024
      Offset: ±2.2 mV
      Offset Tempco: 30.1 µV/°C
      Gain Tempco: 13.2 ppm of range/°C
      Relative Accuracy (Analog Output)
      Range:       ±10V
      Relative Accuracy (INL): ±4.0 LSB typ
      ANALOG INPUT/OUTPUT CALIBRATION
      Recommended Warm-Up Time:       15 minutes min
      Calibration Method: Factory
      Calibration Interval: 1 year (factory calibration)

      DIGITAL INPUT/OUTPUT
      Digital Type:       5V TTL input/advanced BiCMOS output
      Number of I/O: 8
      Configuration: Independently-configured for input or output
      Pull-Up Configuration: All pins pulled up to 5V using 47 K resistors (default); can be changed to pull-down using an internal jumper
      Digital I/O Transfer Rate (System-Paced): 100 to 5000 port reads/writes or single bit reads/writes per second typ, on local network. This is the typical throughput when the device and host are both connected by Ethernet to the same local network. The throughput can vary significantly, and typical throughput is not guaranteed if a wireless connection is involved or data is sent over the internet.
      Alarm Functionality: Any combination of DIO bits may be configured to become outputs and go to defined values when an ethernet connection with a host is established or lost
      Power On and Reset State: All bits are input unless the alarm functionality is enabled for them
      Input High Voltage Threshold: 2.0V min
      Input High Voltage Limit: 5.5V absolute max
      Input Low Voltage Threshold: 0.8V max
      Input Low Voltage Limit: -0.5V absolute min, 0V recommended min
      Output High Voltage: 3.8V typ at no load, 3.0V min (IOH = -3 mA), 2.0V min (IOH = -32 mA)
      Output Low Voltage: 0.15V typ at no load, 0.55V max (IOL = 64 mA)
      Power On and Reset State: Input
      EXTERNAL TRIGGER
      Trigger Source (External Digital):       TRIG
      Trigger Mode: Software-selectable edge or level sensitive; user configurable for CMOS-compatible rising or falling edge, high or low level
      Trigger Latency: 2 µs + 1 pacer clock cycle max
      Trigger Pulse Width: 1 µs min
      Input Type: Schmitt trigger, 47 kΩ pull-down to ground
      Schmitt Trigger Hysteresis: 1.01V typ, 0.6V min, 1.5V max
      Input High Voltage Threshold: 2.43V typ, 1.9V min, 3.1V max
      Input High Voltage Limit: 5.5V absolute max
      Input Low Voltage Threshold: 1.42V typ, 1.0V min, 2.0V max
      Input Low Voltage Limit: -0.5V absolute min, 0V recommended min
      EXTERNAL CLOCK INPUT/OUTPUT
      Terminal Names:       AICKI, AICKO
      Terminal Types
          AICKI:       Input (receives A/D pacer clock from external source)
          AICKO: Output (outputs internal A/D pacer clock)
      Input Clock Rate: 250 kHz max
      Clock Pulse Width
          AICKI:       1 µs min
          AICKO: 1.8 µs min
      Clock Mode: Edge-sensitive, rising
      Input Type: Schmitt trigger, 47 kΩ pull-down to ground
      Schmitt Trigger Hysteresis: 1.01V typ, 0.6V min, 1.5V max
      Input High Voltage Threshold: 2.43V typ, 1.9V min, 3.1V max
      Input High Voltage Limit: 5.5V absolute max
      Input Low Voltage Threshold: 1.42V typ, 1.0V min, 2.0V max
      Input Low Voltage Limit: -0.5V absolute min, 0V recommended min
      Output High Voltage: 4.4V min (IOH = -50 µA), 3.80V min (IOH = -8 mA)
      Output Low Voltage: 0.1V max (IOL = 50 µA), 0.44V max (IOL = 8 mA)

      COUNTER
      Pin Name: CTR
      Counter Type: Event counter
      Number of Channels: 1
      Input Type: Schmitt trigger, 47 kΩ pull-down to ground
      Input Source: CTR screw terminal
      Resolution: 32-bits
      Schmitt Trigger Hysteresis: 1.01V typ, 0.6V min, 1.5V max
      Input High Voltage Threshold: 2.43V typ, 1.9V min, 3.1V max
      Input High Voltage Limit: 5.5V absolute max
      Input Low Voltage Threshold: 1.42V typ, 1.0V min, 2.0V max
      Input Low Voltage Limit: -0.5V absolute min, 0V recommended min
      Input Frequency: 10 MHz max
      High Pulse Width: 50 ns min
      Low Pulse Width: 50 ns min

      MEMORY
      Data FIFO (Analog Input):       49,152 samples
      Non-Volatile Memory: 2048 bytes (768 bytes for calibration, 256 bytes for user, 1024 bytes for network settings)
      POWER
      External Power Supply:       5V, 1A (via included AC adaptor)
      Supply Current (Quiescent Current): 330 mA typ (this is the total quiescent current requirement for the device that includes the LEDs and does not include any potential loading of the digital I/O bits, +VO terminal, or the AOUTX outputs), 710 mA max including all external loading
      User Output Voltage Range (Available at +VO Terminal): 4.40V min to 5.25V max, assumes supplied AC adaptor is used
      User Output Current (Available at +VO Terminal): 10 mA max
      NETWORK
      Ethernet Connection
      Ethernet Type:       100 Base-TX, 10 Base-T
      Communication Rates: 10/100 Mbps, auto-negotiated
      Connector: RJ-45, 8 position
      Cable Length: 100 meters max
      Additional Parameters: HP Auto-MDIX support
      NETWORK INTERFACE
      Protocols Used:       TCP/IP (IPv4 only), UDP
      Network Ports Used: UDP:54211 (discovery), UDP:6234 (bootloader only), TCP:54211 (commands), TCP:54212 (scan data)
      Network IP Configuration: DHCP + link-local, DHCP, static, link-local
      Network Name: E-1608-xxxxxx, where xxxxxx are the lower 6 digits of the device MAC address
      Network Name Publication: By NBNS (responds to b-node broadcasts, therefore only available on the local subnet)
      NETWORK FACTORY DEFAULT SETTINGS
      Factory Default IP Address:       192.168.0.101
      Factory Default Subnet Mask: 255.255.255.0
      Factory Default Gateway: 192.168.0.1
      Factory Default DHCP Setting: DHCP + link-local enabled
      NETWORK SECURITY
      Security Implementation:       TCP sockets are not opened unless application sends the correct PIN code (stored in non-volatile memory, may be changed by user, default value 0000)
      Number of Concurrent Sessions: 1
      Vulnerabilities: TCP sequence number approximation vulnerability
      LED DISPLAYS AND THE FACTORY RESET BUTTON
      Power LED (Top)
       3.3 V < Vext < 5.9 V:       On
       Vext < 3.3V, Vext > 5.9V: Off (power fault)
      Activity LED (Bottom): On when there is a valid host connection and blinks when a command is received or an AInScan is running
      ETHERNET CONNECTOR LEDS
      Left, Green:       Link/activity indicator; on when there is a valid ethernet link and blinks when network activity is detected
      Right, Yellow: Speed indicator; on for 100 Mbps, off for 10 Mbps or no link
      Factory Reset Button: Used to reset the network configuration settings to the factory default values

      ENVIRONMENTAL
      Operating Temperature Range:       0 to 55°C max (32 to 131°F)
      Storage Temperature Range: -40 to 85°C max (-40 to 185°F)
      Humidity: 0 to 90% RH non-condensing max
      SCREW TERMINAL CONNECTORS
      Connector Type:       Screw terminal
      Wire Gauge Range: 16 AWG to 30 AWG
      MECHANICAL
      Dimensions:       117.9 L × 82.8 W × 29.0 mm H (4.64 × 3.26 × 1.14")
      Weight: 0.4 kg (0.88 lb)
























































































































































































































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!