自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>LCIC-WIM-BEN
LCIC-WIM-BEN

LCIC-WIM-BEN

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：LCIC-WIM-BEN

相关行业：

发布时间：2019-12-19 16:49 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • High Speed; Up to 52,000 Samples per Second
    • 24-Bit A/D with ±8 Million Counts for Tension and Compression Applications
    • Powerful 32-Bit /135 MIPS DSP for High Speed
      On-Board Processing - OEM Applications Can Be Embedded On The Board
    • 4 Opto-Isolated Outputs Configurable as Setpoints, Latching Alarms or User Outputs
    • 4 Opto-Isolated Inputs; Input #1 Has Counter Option
    • Analog Output—0 to 2.5V, 16-Bit
    • 8-Digit LED Display
    • On Board Temperature Sensor
    • USB 2.0 Interface—Full Speed Compatible
    • RS-232/RS-485 Communications Ideal for PLC Based Applications
    • Multiple Boards May Be Connected
      Via USB or RS-485

      • The LCIC-WIM is a high speed, intelligent loadcell interface card with USB/RS-232/RS-485 interfaces.Besides its basic mode, the board includes an integralFill Mode supplying an independent filling control.The board is intelligent and powerful enough for OEMcustomers—it is ready to accept piggy-back modulesand/or embedded applications for OEM specialrequirements. The LCIC-WIM-BEN is usefulin applications such as analyzing noise and vibration ina belt conveyor or any dynamic weighing system, forexample the time it takes for stabilization after a loadwas applied. Other potential applications includechecking scale behavior for slow/high speed WIM(weighing in motion) applications, measuring maximum(peak) and minimum forces on a scale/testing machine(helps to select the suitable load cell for optimumperformance), and running tests and getting immediatefinal weight results on WIM and check weighers.

      LCIC-WIM Software
      Three software utilities are supplied with the board:LCIC-WIM-CALIBRATION, LCIC-WIM-SETTINGS andLCIC-WIM-MONITOR. These software utilities enableeasy selection and setup of the required board.The calibration utility (LCIC-WIM-CALIBRATION)enables you to calibrate the LCIC-WIM-BEN board byadjusting it to your own system. The utility is straightforward and is in the form of a Windows® wizard.The LCIC-WIM-SETTINGS utility gives control to card’sfilters, analog output, fill mode parameters and more.

      The LCIC-WIM-MONITOR utility is a vital tool foranalyzing dynamic load/force systems. It takes fulladvantage of the board’s speed and samples the loadcell signal at maximum speed (15,000 samples persecond), sending the data to the PC via the USB portand displaying it as a curve—load cell signal/versus time.You can then zoom in/out on the data, view max (peak)and min readings, save the data in standard ASCII fileformat for later use and even perform some calculationslike averaging on a required part of the curve.

      Specifications
      LOAD CELL INPUT
      Bridge Input:       1 input, 4-wire or 6-wire
      Excitation: 5 Vdc excitation for up to 10 load cells (350 Ω) in parallel
      Compatibility: Compatible with 1, 2 & 3 mV/V load cells

      A/D
      Speed:       Low noise wide bandwith amplifier, very highspeed, up to 52,000 samples per second
      Resolution: 24-bit A/D with ±8 million counts fortension and compression applications

      COMMUNICATIONS
      Standard Interfaces:       USB 2.0 full speed compatible;combined RS-232/RS-485

      INPUTS
      Digital Inputs:       4 opto-isolated inputs with 10 to 30 Vdcrange, each with status LED; input #1 configurable ashigh speed counter; input #2 configurable as sampletrigger

      OUTPUTS
      Relays:       4 opto-isolated solid state relays rated at 50 V,300 mA; configurable as setpoints,
      latching alarms oruser outputs, each with status LED
      Analog Output: 0 to 2.5 Vdc with 16-bit resolution

      GENERAL
      Power:       From included 110/220 Vac adaptor
      DSP: Powerful 32-bit/135 MIPS DSP for high speedonboard processing
      RS-232/485 Port: DB9F connector
      I/O Port: DB15M connector(digital inputs, relay outputs, analog output)
      Display: 8-digit LED display
      Temperature Sensor: On-board
      Dimensions: Standard (Eurocard); 160 L x 100 mm W(6.3 x 3.94")
      Weight: 251 g (9 oz)
      Case: ABS





































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!