自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>DRI-SP-AC
DRI-SP-AC

DRI-SP-AC

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：DRI-SP-AC

相关行业：

发布时间：2019-12-19 16:48 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Provides 2 Fully Isolated DC Output Signals in Proportion to 1 DC Input (Signal Splitter)
    • Field Configurable Input/Output Ranges
    • 1800 Vdc Isolation
    • Touch Calibration Technology
    • High Density DIN Rail Mounting
    • Universal AC Power 85 to 265 Vac

      • AC powered, DIN railmount, DC input signal splitter, with 1800 Vdc isolationbetween input, output and power. The DRI-SP-AC Series provides two fullyisolated DC output signals in proportion to one DCinput. The field configurable input and output featureoffers flexible, wide ranging capability for DC currentand voltage signals.

      Using a pushbutton instead of potentiometers,improvements in calibration resolution and reliability arerealized due to the elimination of the potentiometers’mechanical variability. The thermal drift and mechanicalvariability of the potentiometers has been removed andreplaced with a digitally stable circuit. Additionally, theinherent zero and span interactivity of analog amplifiercircuitry is removed, providing 100% non-interactiveadjustment.

      The DRI-SP-AC can be field configured for virtuallyany DC input to DC output within the limits specified.Calibration utilizes touch calibration technology wherethe user simply configures the input for the current orvoltage range via switches, then follows the calibrationprocedure. The output is set by adjusting the input untilthe desired output is present and then pressing theCAL button to store the output level.

      The DRI-SP-AC has three diagnostic LEDs. The green(RUN) LED is used for diagnostics to indicate thatpower is on. It will flash quickly if the input signal isabove the calibrated range or slowly if the input signalis below range. It is on continuously when the unit isfunctioning within the calibrated range.

      The DRI-SP-AC can be configured for input rangesfrom 10 mV to 100V or 1 mA to 100 mA, with >90%input offset or will adjust down to <10% of full scaleinput span (except on 20 mV/2 mA range wheremaximum offset or gain adjustment is 50%).

      The factory default configuration for the DRI-SP-AC is:
      Input Range: 20 mA (current on)
      Input Configuration: Unipolar
      Calibrated Input: 4 to 20 mA
      Operation: Direct (reverse off)
      Calibrated Output: 4 to 20 mA

      Specifications
      INPUT
      Voltage Input:
          Range: 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1V, 2V,5V, 10V, 25V, 50V, 100V (dip-switch selectable)
          Impedance: ≥100 kΩ
          Overvoltage: 200V continuous
      Current Input:
          Range: 2 mA, 5 mA, 10 mA, 20 mA, 50 mA, 100 mA(dip-switch selectable)
          Impedance: 20 Ω typical
          Overcurrent: 170 mA, protected by self resetting fuse
          Overvoltage: 60V
      Pushbutton Adjustment (Inputs >10 mV):
          Effective Zero Offset: ≥90%
          Effective Span Turn Down: ≥90% except 20 mV/2 mArange in which 50% is max zero offset and span turndown

      OUTPUTS (2 Channels)
      Voltage Output:
          Range: 0 to 5V, 0 to 10V (dip-switch selectable)
          Source Impedance: <10 Ω
          Drive: 10 mA max
      Current Output:
          Range: 4 to 20 mA, 0 to 1 mA (dip-switch selectable)
          Source Impedance: >100 kΩ
          Compliance:
              0 to 1 mA: 7.5V max (7.5 kΩ)
              4 to 20 mA: 10V max (500 Ω)
      Output Ripple:
          <50% Offset or Span Adjust: <0.1% of full scale span or 25 mV RMS, whichever is greater
          >50% Offset or Span Adjust: <0.2% of full scale span or 50 mV RMS, whichever is greater
      Output Accuracy:
          >2 mA/>20 mV Input Spans: ±0.1% of full-scale inputtypical, ±0.2% maximum
          <2 mA/<20 mV Input Spans: ±0.35% of full scale inputtypical, ± 0.5% maximum including linearity, repeatabilityand hysteresis @ 23°C
      Response Time: 200 msec, typical
      Stability: ±0.025% of full scale/°C, maximum for full scale and zero
      Common Mode Rejection: 120 dB at DC, >90 dB at 60 Hz
      Isolation: ≥1800 Vdc or peak AC between input, output, power and channel-to-channel
      ESD Susceptibility: Capable of meeting IEC 801-2 level 3(8 kV)
      Humidity (Non-Condensing):
          Operating: 15 to 95 %RH @ 45°C (113°F)
          Soak: 90% RH for 24 hours @ 60°C (140°F)
      Temperature:
          Operating: 0 to 55°C (32 to 131°F)
          Storage: -25 to 70°C (-13 to 158°F)
      Power: 100 to 240 Vac, ±10%, 50 to 400 Hz; 2.5 W max
      Wire Terminals: Socketed screw terminals for 12 to 22 AWG
      Weight: 227 g (0.5 lb)





























































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!