自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>DRI-LPO-Series
DRI-LPO-Series

DRI-LPO-Series

分  类：测量测试仪器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：DRI-LPO-Series

相关行业：

发布时间：2019-12-19 16:48 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Provides One or Two Isolated 4 to 20 mA Output Current Loops in Proportion to One or Two DC Inputs
    • High Density DIN Rail Mounting
    • Prevents Ground Loops
    • Plug-in Terminals
    • Standard Input Ranges
    • Output Loop Powered from 12 to 35 Vdc

      • The DRI-LPO Series are DIN rail mount, DC input,single or dual channel, isolating two-wire transmitters.Each channel accepts a DC voltage or current input andprovides an isolated 4 to 20 mA output. Each channelis fully isolated (1800 Vdc) from input-to-output andchannel-to-channel.

      All DRI-LPO Series modules feature plug-in screwterminals for easy installation and low Mean-Time-To-Repair (MTTR). Two or more modules can slide togetherand interlock for solid, high density mounting. This isaccomplished by removing either the foot, or the adjacentunit’s faceplate (for right-hand side or left-hand sidemounting, respectively). The module to be attached willeasily slide on to the side of the mounted unit.

      DC input, two-wire transmitters are used to isolate andconvert a DC voltage or current into a proportional 4 to20 mA signal. Two-wire transmitters are primarily usedin remote locations near the sensor since they reducethe probability of signal errors and save wiring costsby utilizing the two power wires to send the 4 to 20 mAsignal. The current signal is usually monitored by acontrol system or displayed for an operator.

      Typically, DC voltages or currents from variousfield instruments (e.g. level, flow, pressure andposition sensors) are used to monitor and control amanufacturing process. Voltage signals can only runa short distance to a panel without errors caused bynoise or lead resistance in the wires. These sensor(voltage) signal wires are usually terminated at thetwo-wire transmitter and converted into a 4 to20 mA signal which is highly immune to noise and notaffected by lead resistance, both of which can causesignificant errors in voltage signals transmitted overlong distances. The 1800 Vdc isolation capability of theDRI-LPO Series prevents ground loops from causingerrors in DC voltage or current signals and can reducesusceptibility to radio frequency interference (RFI).Isolation also provides protection from high voltagesand current spikes which can damage expensivesupervisory control and data acquisition (SCADA)equipment, such as a PLC or DCS.

      The DRI-LPO Series operates as a two-wiretransmitter; each channel derives its power from a12 to 35 Vdc source connected in series with the 4 to20 mA output loop. Typically a 24 Vdc source is usedfor power, allowing 12 Vdc (600 Ω @ 20 mA) for otherdevices connected in series in the current loop. Theoutputs of the DRI-LPO Series are isolated from theinputs and protected from reverse polarity. Zero andspan pots are provided for each channel to calibratethe output to the input source (±5%). Standard inputranges are calibrated to rated accuracy. One range permodule; one or two channels per module.

      Specifications
      INPUT
          DRI-LPO-MA: 1 channel, 4 to 20 mA input
          DRI-LPO-2MA: 2 channels, 4 to 20 mA input
          DRI-LPO-V: 1 channel, 0 to 10V input
      OUTPUT
          DRI-LPO-MA, DRI-LPO-V: 1 channel, 4 to 20 mA output
          DRI-LPO-2MA: 2 channels, 4 to 20 mA output
      Impedance: ≥100 kΩ (voltage input); ≤20 Ω (4 to 20 mA input)
      Protection: Withstands up to 24 Vdc (current input), 120 Vac(voltage input) without damage
      Supply Voltage Range: 12 to 35 Vdc, each channel
      Output Accuracy: ≤0.1% of full-scale input typical, ≤0.2%max @ 23°C including linearity, repeatability and hysteresis
      Adjustability: Front accessed 10 turn pot, ±5% of span forzero and span, typical
      Stability: ≤0.025%/°C of full-scale maximum
      ESD Susceptibility: Meets IEC 801-2 level 2 (4kV)
      Isolation: 1800 Vdc or peak AC between input and output and channel-to-channel
      Response Time: 100 msec typical (10 to 90%)
      Temperature:
          Operating: -40 to 80°C (-40 to 176°F)
          Storage: -40 to 80°C (-40 to 176°F)
      Humidity (Non-Condensing): 15 to 90% RH @ 45°C (113°F)
      Wire Terminals: Socketed screw terminals for 12 to 22 AWG
      Weight: 154 g (0.34 lb)
































    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!