自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>XRU1D Series
XRU1D Series

XRU1D Series

分  类：压力传感器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：XRU1D Series

相关行业：

发布时间：2019-12-19 16:43 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Pluggable Relay Allows for Field Replacement
    • Functional Plug-In Bridges
    • Screw Connections
    • LED Status Indication
    • DIN Rail Mount
    • Only 6.2 mm (0.24") Wide
    • All Common Input Voltages Between 24 Vdc to 120 Vac
    • NEMA 6 (IP67) Protection
    • Environmentally Friendly, Cadmium-Free Contact
    • Easy, Cost-Effective and Replacement Using Engagement Lever

      • Application Description
      Used in automation systems, electromechanical relays guarantee a safeconnection between process I/O and electronic controls. The following functionsare covered by relay coupling elements:
      • Electrical isolation between theinput and output circuits
      • Independence of the type ofswitching current (AC and DC)
      • High short-term overloadresistance in the event of shortcircuits or voltage peaks
      • Low switching losses
      • Ease of operation

      Accessories
      Power Terminal Block
      The XRAPLCESK power terminal block hasthe same shape as the relay modules and isused to feed in the bridging potentials. Thenominal current is 32 A. When the totalcurrent is less than or equal to 6 A, supplycan take place directly at the connectingterminal blocks of one of the connectedrelays.

      End Cover
      The XRAATPBK end cover is required at thestart and stop of a relay strip. It can also beused for visual separation of groups ofrelays as well as separating relays withvoltages greater than 250V and separatingneighboring bridges with different potentials.It is equipped with pre-scored break outpoints at the bridging positions so thatindividual bridges can be passed through asneeded. It may also be necessary to use theend cover between adjacent relays whenthree phases (L1, L2, L3) are used on thecontact side of the relay.

      Bridges
      The XRAFBST colored, insulated pluginbridge system reduces wiring time by up to70% compared to conventionally wiredrelays. The XRAFBST2, 2-position bridges,are suited for bridging a smaller number ofrelays and total currents <6 A. When a circuitis supplied from both sides, the circuit canbe opened at any point, allowing all othermodules to continue being supplied at thesame time. The XRAFBST500 allow up to80 modules to be bridged at one time. Ifbridges with different potentials meet inneighboring modules, the end coverXRAATPBK should be used. All bridges areequipped with a groove for removal with astandard screwdriver.

      SPECIFICATIONS
      Input Voltage:
         XRU1D24: 24 Vdc
         XRU1D24U: 24 Vac/Vdc
         XRU1D120U: 120 Vac/110 Vdc
      Typical Input Current:
         XRU1D24: 9 mA
         XRU1D24U: 11 mA (24 Vac), 8.5 mA (24 Vdc)
         XRU1D120U: 3.5 mA (120 Vac), 3 mA (110 Vdc)
      Connection Type: Screw connection
      Rigid Solid AWG (mm2): 26 to 14 (0.14 to 2.5)
      Flexible Stranded AWG (mm2): 26 to 14 (0.14 to 2.5)
      Typical Response Time:
         XRU1D24: 5 mS
         XRU1D24U and XRU1D120U: 6 mS
      Typical Release Time:
         XRU1D24: 8 mS
         XRU1D24U and XRU1D120U: 15 mS
      Input Protection:
         XRU1D24: Polarity protection diode, free-wheeling diode
         XRU1D24U and XRU1D120U: Bridge rectifier
      Contact Type: SPDT
      Contact Material: AgSnO
      Max Switching Voltage: 250 Vac/Vdc1
      Min Switching Voltage: 12 Vac/Vdc
      Limiting Continuous Current: 6 A
      Min Switching Current: 10 mA
      Min Switching Power: 120 mW
      Ambient Temp Range: -20 to 60°C (-4 to 140°F)
      Rated Operating Mode: 100% operating factor
      Inflammability Class: V0, in accordance with UL 94
      Mechanical Service Life: 2 x 107 cycles
      *The separating plate, XRAPLCESK, shouldbe installed for voltages greater than 250V(L1, L2, L3) between identical terminal pointsof adjacent modules. Potential bridging isthen possible with the XRAFBST bridgesystem.
    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!