当前位置:自动化网>Omega工业测量(中国)门户>产品中心>SSRL240 andSSRL660 Series
SSRL240 andSSRL660 Series

SSRL240 andSSRL660 Series

分  类:压力传感器

品  牌:欧米茄

厂  商:Omega工业测量(中国)

型  号:SSRL240 andSSRL660 Series

相关行业:

发布时间:2019-12-19 16:43 浏览人数:

最新产品

产品详情
参数
包装
  • Solid State Relays SSR Rarted to 100 Amps
  • Multi-Million Cycle Life
  • Compatible with Temperature Controllers
  • Solid-State, SCR Design
  • Zero Voltage Switching
  • Control ac Lines to 660 Vac
  • AC and DC Control Signal Models
  • LED Input Status Indicator

  • The Omega's SSRL series of solid state relays are used to control largeresistance heaters in conjunction with temperature controllers. Solidstate relays are SPST, normally open switching devices withno moving parts, capable of millions of cycles of operation. By applying acontrol signal, an SSR switches ON the ac load current, just as themoving contacts do on a mechanical contactor. Three-phaseloads can be controlled using 2 or 3 SSR’s. Use 3 SSR’s for Y or star3-phase loads using a neutral line. Two SSR’s will control “delta” loadswith no neutral line. Three solid state relays are also used whenthere is no neutral load to provide redundancy and extra assurance ofcontrol.

    "Switching" takes place at the zero voltage crossover point of thealternating current cycle. Because of this, no appreciable electricalnoise is generated, making SSR’s ideal for environments where thereare apparatuses susceptible to RFI.

    Common Specifications
    Operating Temperature: -20 to 80°C (-5 to 175°F)
    Storage Temperature:-40 to 80°C (-40 to 175°F)
    Isolation: 4000 Vrms, input to output; 2500 Vrms input/output to ground
    Capacitance: 8 pF, input to output (max)
    Line Frequency Range: 47 to 63 Hz
    Turn-On Time: 20 ms, ac; 05 cycle, dc
    Turn-Off Time: 30 ms, ac; 05 cycle, dc

    These SSR’s are of the twin SCR type, inherently morereliable and capable of higher overloads before failure thantriacs. Heat is developed in a solid state relay due to thenominal voltage drop across the switching device. Todissipate the heat, an SSR must be mounted on a finnedheat sink or aluminum plate. An SSR should be locatedwhere the ambient temperature is relatively low, since thecurrent switching rating is lowered as the temperatureincreases. Another SSR characteristic is a small leakagecurrent across the output when the relay is open. Becauseof this, a voltage will always exist on the load sideof the device.

    In comparing SSR’s with mechanical contactors, the SSRhas a cycle life many times that of a comparably pricedcontactor. However, SSR’s are more prone to failure due tooverload and improper initial wiring. Solid state relays canfail, contact closed, on overload circuits. It is essential that aproperly rated, fast blowing I2T fuse be installed to protectthe load circuit.

    Finned heat sinks are anodized fabrications that comecomplete with tapped mounting holes and screws. Seethermal rating curves and ordering instructions for properselection.

    All SSRL series relays come with a thermally conductivepad mounted on the baseplate. This will significantlyimprove the thermal conductivity between the heat sink andSSR baseplate. It is also suggested that 10-inch-pounds oftorque be used on the SSR mounting screws.





    Output Specifications for Vac and Vdc Input Models
    Specifications10 Amp25 Amp50 Amp75 Amp100 Amp
    Max On State Current10 A25 A50 A75 A100 A
    Max On State Current100 mA
    Max 1-Cycle Surge150 A300 A750 A1000 A1200 A
    Max 1 sec Surge30 A75 A150 A225 A300 A
    12T (60 Hz), A2sec416937245850006000


    SSR240 Series Electrical Specifications
     Input-Control SignalOutput
    Model No.TypeControl
    Signal
    Voltage
    Control
    Signal
    Turn-On
    Control
    Signal
    Turn-Off
    Max
    Input
    Current
    Peak
    Voltage*
    (60 Sec. Max.)
    SSRL240AC10
    SSRL240AC25
    SSRL240AC50
    SSRL240AC75
    SSRL240AC100
    ac
    Control
    Signal
    90 to 280 Vac90 Vac10 Vac10 mA800 V
    SSRL240DC10
    SSRL240DC25
    SSRL240DC50
    SSRL240DC75
    SSRL240DC100
    dc
    Control
    Signal
    3 to 32 Vdc3 Vdc1 Vdc14 mA800 V
    SSRL660AC50
    SSRL660AC75
    SSRL660AC100
    ac
    Control
    Signal
    90 to 280 Vac90 Vac10 Vac10 mA1200 V
    SSRL660DC50
    SSRL660DC75
    SSRL660DC100
    dc
    Control
    Signal
    4 to 32 Vdc4 Vdc1 Vdc14 mA1200 V
    *Transients above table value should be suppressed.

    SSR240 Series Output-Vac Load Specifications
    Model No.Nominal
    ac Line
    Voltage
    Nominal
    Load
    Current
    Max.
    Contact
    Voltage Drop
    Max. Off-State Leakage
    (25°C max. ambient)
    120 Vac240 Vac440 Vac
    SSRL240AC10
    SSRL240AC25
    SSRL240AC50
    SSRL240AC75
    SSRL240AC100
    24 to 280 Vac10 A
    25 A
    50 A
    75 A
    100 A
    1.6 V0.1 mA0.1 mAN/A
    SSRL240DC10
    SSRL240DC25
    SSRL240DC50
    SSRL240DC75
    SSRL240DC100
    24 to 280 Vac10 A
    25 A
    50 A
    75 A
    100 A
    1.6 V0.1 mA0.1 mAN/A
    SSRL660AC50
    SSRL660AC75
    SSRL660AC100
    48 to 660 Vac50 A
    75 A
    100A
    1.6 V0.25 mA0.25 mA0.25 mA
    SSRL660DC50
    SSRL660DC75
    SSRL660DC100
    48 to 660 Vac50 A
    75 A
    100 A
    1.6 V0.25 mA0.25 mA0.25 mA

暂无内容提供
暂无内容提供

联系方式

中国自动化网安全提示,在购买供应商商品时,请一定要先审核好企业信息是否真实,谨防网上诈骗。
公司名称:Omega工业测量(中国)
联系人: 王先生
联系电话:02161973664
手机号:
传 真:
电子信箱:kevin.wang@cn.omega.com
公司网站:http://cn.omega.com
公司地址:上海市宜山路1698号102单元
留言反馈
  • 评价:

  • 关于:

  • 联系人:

  • 联系电话:

  • 联系邮箱:

  • 需求意向:

  • 验证码:

    看不清楚?

  • 在线咨询
X
下载企业APP

成为企业会员免费生成APP!