自动化平台 | 产品库 | 品牌库 | 企业库
Omega工业测量（中国）
当前位置：自动化网>Omega工业测量（中国）门户>产品中心>DRSL-TEMP
DRSL-TEMP

DRSL-TEMP

分  类：压力传感器

品  牌：欧米茄

厂  商：Omega工业测量（中国）

型  号：DRSL-TEMP

相关行业：

发布时间：2019-12-19 16:40 浏览人数：人

最新产品

    产品详情
    参数
    包装
    • Type J or K Thermocouple or 2, 3 or 4-Wire Pt100 RTD Input
    • Powered By the Host (Output) Current Signal Loop
    • Slimline 6 mm (0.24") Housing
    • High Accuracy
    • Excellent EMC Performance and 50/60 Hz Noise Suppression
    • Fast Response Time <30 ms/300 ms (Selectable)
    • Pre-Calibrated Temperature Ranges Selectable via DIP-Switches

      • The DRSL-TEMP isolated DIN railloop-powered temperature signalconditioner measures a standardtype J or K thermocouple or a 2-,3- or 4-wire Pt100 RTD temperaturesensor and provides a passiveanalog current output signal.

      TheDRSL-TEMP offers 2-way isolationbetween input and output, providessurge suppression and protectscontrol systems from transients andnoise.

      The DRSL-TEMP provides acompetitive choice in terms of bothprice and technology for interfacingthermocouple or RTD signals toSCADA systems or PLC equipment.This unit is powered by the host(output) current signal loop. Lowpower consumption facilitates DIN railmounting without the need for any airgap. Easy configuration of more than1000 factory calibrated measurementranges is done via DIP-switches. Theunit operates over a wide temperaturerange from -25 to 70°C (-13 to 158°F).

      SPECIFICATIONS
      INPUT
      THERMOCOUPLE INPUT
      Type: J or K thermocouple
      Temperature Range (DIP Swich Selectable)
          Type J: -100 to 1200°C (-148 to 2192°F)
          Type K: -180 to 1372°C (-292 to 2501°F)
      Sensor and Cable Specifications: 5 kΩ per wire
      Cold Junction Compensation (CJC): Internal or external (selectable)
          CJC Accuracy via External CJC (Pt100 RTD Sensor): Better than ±0.15°C
          CJC via Internally Mounted Sensor: Better than ±2.5°C
      Open Thermocouple Detection: Yes (DIP switch selectable upscale or downscale)
      Pt100 RTD INPUT
      Type: 2, 3, or 4-wire Pt100 RTD
      Temperature Range (DIP Switch Selectable): -200 to 850°C (-328 to 1562°F)
      Sensor Current, RTD: <150 µA
      Sensor Cable Specifications: 50 Ω per wire
      Effect of Sensor Cable Resistance (3 or 4-Wire RTD): <0.002 Ω/Ω
      Broken Sensor Detection: >800 Ω
      Shorted Sensor Detection: <18 Ω

      OUTPUT
      Current Output
          Programmable Signal Ranges: 0 to 20 mA and 4 to 20 mA
          Range Limits (NAMUR NE43 Out of Range): Below 3.8 mA or above 20.5 mA
          Sensor Error Detection (Dip Switch Selectable for Enable or None): Below 3.5 mA or above 23 mA
          Incorrect DIP-Switch Setting Identification: Below 3.5 mA
          Output Error Level: DIP switch selectable for upscale or downscale
          Load Resistance (Ω): ≤(Vsupply - 5.5)/0.023
          Load Stability: ≤0.01% of span/100 Ω

      GENERAL
      Supply Voltage: 5.5 to 35 Vdc
      Voltage Drop: 5.5 Vdc
      Isolation: Input/output
      Isolation Voltage (Test): 2.5 kVac (reinforced)
      Isolation Voltage (Working): 300 Vac
      Signal/Noise Ratio: >60 dB
      Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed)
      Accuracy
          Thermocouple Input: Better than 0.5°C or ±0.05% of span (selected input range)
          RTD Input: Better than 0.1°C or ±0.05% of span (selected input range)
      Temperature Coefficient
          Thermocouple Input: ≤±0.1°C/°C or ≤±0.01%/°C
          RTD Input: ≤±0.02 °C/°C
      EMC Immunity Influence: <±0.5% of span
      Extended EMC Immunity
          NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range)

      ENVIRONMENTAL
      Operating Temperature: -25 to 70°C (-13 to 158°F)
      Storage Temperature: -40 to 85°C (-40 to 185°F)
      Calibration Temperature: 20 to 28°C (68 to 82°F)
      Relative Humidity: 0 to 95% RH non-condensing
      Protection Degree: IP20
      Installation Area: Pollution degree 2 and measurement/overvoltage category II

      MECHANICAL
      Dimensions: 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5")
      Weight: 70 g (0.15 lb) approx
      DIN Rail Type: DIN EN 60715 - 35 mm
      Wire Size: 0.13 x 2.5 mm²/AWG 26 to 12 stranded wire
      Screw Terminal Torque: 0.5 Nm



    暂无内容提供
    暂无内容提供

    联系方式

    中国自动化网安全提示，在购买供应商商品时，请一定要先审核好企业信息是否真实，谨防网上诈骗。
    公司名称：Omega工业测量（中国）
    联系人： 王先生
    联系电话：02161973664
    手机号：
    传 真：
    电子信箱：kevin.wang@cn.omega.com
    公司网站：http://cn.omega.com
    公司地址：上海市宜山路1698号102单元
    留言反馈
    • 评价：

    • 关于：

    • 联系人：

    • 联系电话：

    • 联系邮箱：

    • 需求意向：

    • 验证码：

      看不清楚？

    产品分类

    热门产品

    网友反馈

    • 王莹: 在2021/5/22 11:20:43留言
    • 留言内容: 产品名称：热电偶 规格型号：KMQXL-032U-12 品牌：OMEGA 数量：1032
    • 柴宾: 在2019/6/25 14:33:54留言
    • 留言内容: 实验室用
    • 万: 在2017/7/25 16:01:36留言
    • 留言内容: 压差传感器：50psi，px409-050dwu5v 1只 压力传感器：10000Psi，0-5V，PX309系列，接头类型1/4” NPT 1只 压力传感器：2000psi,0-5V,PX409系列，接头类型是1/4” NPT 2只
    • 袁先生: 在2017/4/10 14:46:33留言
    • 留言内容: 需要在滑阀的阀芯末端接上该传感器，反映出滑阀在工作中阀芯所受力的情况
    • 王沛: 在2016/8/28 19:30:28留言
    • 留言内容: 购买温度记录器和热电偶

    公司名称：Omega工业测量（中国）-OMEGA

    公司地址：上海市宜山路1698号102单元 联系电话：02161973664

    版权所有：Omega工业测量（中国）    技术支持：中国自动化网(www.ca800.com)
    服务中心：0755-82912455 Email:service@ca800.com 商务洽谈：0755-82912455 Email:ad@ca800.com 广告垂询：18025374346
    • 在线咨询
    X
    下载企业APP

    成为企业会员免费生成APP!