产品简述 (Product Profile)
复合超导平板热管一种具有超导热性能的传热元件。复合超导平板热管依靠内部特殊（复合）工质的相变传热传质，复合超导平板热管的表观热传导率是同样金属材质热传导率的一万倍左右，是具有同样表面积的传统圆形热管的换热能力的5～20倍，承压能力是后者的10～20倍以上，而成本则只有传统热管的1/3以下。Composite superconducting flat heat pipe (SFHP) is a thermal conducting component having a thermal superconductive performance. SFHPrelyon the internal specialfluid which heat and mass transfer with phase transfer, the thermal conductivity of its surface area is about a million times of the metal thermal
conductive product on the market, the traditional cylinder shapedheat pipe having the equal surface area transfers 5 to 20 times less heat, thus the latte bearing capacity is 10 to 20 times less, whereas the SFHP costs1/3 or less of a traditional
heat pipe.
产品参数 (Product parameters)
复合超导平板热管仿真图
产品应用 (Product Application)
工作原理 (Working Principle)
复合超导平板热管工作原理如图三所示，典型的设计
都是由密闭多孔微槽群阵列管和工作液及复合毛细结构
组成，将管内抽成1.0×(10 -2 ～10 -3 )Pa的负压后充以适量的工作液体，密封。腔体的一端为蒸发段(加热段)，另一端为冷凝段(冷却段)。腔体的一端受热时腔体中的液体蒸发汽化，蒸汽在微小的压差下流向另一端放出热量凝结成液体，液体沿重力及毛细力方向流回蒸发段，如此循环不已，热量由热管的一端传至另一端。Composite Superconducting Flat Heat Pipe working principle as shown in figure 3, a typical design are made of porous micro capillary groove arrays sealed
tube and the capillary structure of the working fluid and complex composition, the tube is evacuated 1.0 × (10 -2 ~ 10 -3 ) Pa after the appropriate amount of negative pressure filled with working fluid, sealed. One end of the cavity is evaporator section (heating section), and the other end is condensing section (cooling section). When evaporator section heated with liquid evaporates, a
slight differential pressure steam flow to another end of the section and heat released condenses into a liquid, the liquid along the direction of the gravity force and capillary flow back to the evaporator, so endless loop, heat transfers from one endof the pipe to the another.
上海鹰峰3D复合超导平板热管散热模组（第三代）SHANGHAI EAGTOP 3 D Composite superconducting flat heat pipe radiator module (third generation)
1、基板与复合超导平板热管(FHP)组成3D连通的相变传热体系
2、相变基板受热时，工质吸收热量，相变为蒸汽，蒸汽沿蒸汽通道将热量传递至每片热管（FHP）管道，并将热量传递至远端，
3、FHP散热翅片进行热量交换，释放热量，工质冷凝回流至相变基板区，从而形成热量交换循环 。
1. Base plate and Composite superconducting flat heat pipe (FHP) 3D connected phase change heat transfer system.
2. Phase transformation substrate when heated, working medium, heat absorption phase into steam, steam along the channel transfer heat to each heat pipe (FHP) pipe, and transfer heat to the far end.
3. FHP heat exchange with the heat dissipation fin, heat, working medium condenser to phase transformation base board area, forming a heat exchange circulating.
技术特点 (Product Features)
1、由于与热源接触区域（基板）采用了相变技术，可以有效控制并降低接触热阻；
2、同时由于基板与每片热管（FHP）共同组成3D工质相变、传递通道，从而有效降低了从热源接触区域（基板）至热管（FHP）的热阻，并提高了热管（FHP）与翅片的热交换效率。
3、3D复合超导平板热管散热器具有更高的传热性能、散热性能及更优化的体积结构。
1. Due to the contact with the heat source area (substrate) used phase change technology, can effectively control and reduce the contact thermal resistance;
2. At the same time due to the base plate with each heat pipe (FHP) of 3 Dlaser phase transformation, transmission channels, thus effectively reducing the contact area (substrate) from the heat source to heat pipe (FHP) thermal resistance, and improved the heat exchange efficiency of the heat pipe (FHP) and fin.
3. 3D Composite Superconducting Flat Heat Pipe radiator has a higher heat transfer performance, thermal performance and the volume of a more optimized structure.
应用范围 (Application Arange)
适用于功率模块、光伏逆变、SVG、高低压变频、APF、绿色能源、大型换热、轨道交通等领域大功率散热或换热组件。
Applicable to the power module, photovoltaic inverter, SVG, high and low voltage inverter, APF, green energy, large heat exchange,rail transit in the fields of high power radiator, or heat transfer components
