技术
|
|
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service
|
|
性能
|
|
|
|
14,880pps for 10M Ethernet,148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
|
|
|
64 bytes ~ 1522 bytes (含 VLAN Tag)
|
|
|
|
|
|
|
符合IEEE802.1p class of service, 每个端口支持4个优先级
8 (Higher):4(High):2(Low):1(Lower) scheduling.
Tag Priority ID: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)
|
|
界面
|
|
7 x 10/100 Base-TX withAuto MDI/MDI-X function Auto-Negotiation
3 x 1000Base-Tsupports Auto MDI/MDI-X ,Auto-Negotiation ,SFP socket
Gigabit Port10: 1000Base-T (1000Mbps) / Gigabit Fiber
Gigabit port8/9: 10/100/1000Mbps / Gigabit Fiber
|
|
|
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP: 支持全部3.3v SFP 类型千兆光纤收发器
电源: 4-Pin可拆卸接线槽
|
|
|
RJ-45接头: 支持CAT-3, CAT-4, CAT-5屏蔽或非屏蔽双绞线。 最大传输距离100米。
|
|
|
电源:Power 1 (Green), Power 2 (Green) 10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow)
port: Link/Activity(Green)
1000Base-TRJ-45 port: Link/Activity (Green)
SFP: Link/Activity (Green)
|
|
电源要求
|
|
4-Pin可拆卸接线槽
冗余电源DC 24V (12~48V)支持正负极性反接保护
|
|
|
11.5 Watts @ DC 24V(Maximum)
|
|
机械规格
|
|
|
|
|
|
137mm(H) x 96mm (W) x 119mm (D)
|
|
|
|
工作环境
|
|
JetNet3010G: -20 ~ 70°C
JetNet3010G-w: -40 ~ 70°C
|
|
|
|
|
|
|
|
|
|
通过认证
|
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
|
|
|
|
|
|
|
|
|
|
|
|
|
|