IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3u 100Base-FX
                              IEEE 802.3ab 1000Base-T
                              IEEE 802.3z Gigabit Ethernet Fiber
                              IEEE 802.3af Power over Ethernet
                              IEEE 802.3at High Power PoE with 2-Event classification
                              IEEE 802.3x flow control and back-pressure

2K MAC物理地址列表

1Mbits

存储转发交换技术

64bytes ~ 9Kbytes jumbo frame

10Mbps -14880 PPS
                              100Mbps-148800 PPS
                              1000Mbps -1488000 PPS
                              PPS:每秒封包数量, 64Bytes封包长度                           

5个1000Mbps RJ-45自适应MDI/ MDI-X,自动协商功能，包含4个IEEE 802.3af/IEEE 802.3at以太网供电端口ports

1个SFP插槽，支持千兆SFP模块或百兆SFP模块。可通过DIP拨码开关选择
                              （需重启）

冗余电源输入支持极性反接保护，可拆卸6-pin接线端子

1路干继电器报警输出，通常为开路

100Base-TX: 2-pairs EIA/TIA568-B UTP/STPCat.5e/ Cat.6 cable
                              1000Base-T: 4-pairs EIA/TIA568-B UTP/STPCat.5e/ Cat.6 cable

通过6-pin DIP拨码开关启动或关闭端口断连或掉电报警

电流0.5A，电压DC24V

正常状态 (报警关闭) – 建立一个开路
                              异常情况(报警启动) – 建立一个回路

Power1(绿灯)/Power2(绿灯), AlarmActive (红灯)
Ethernet Link/Activity (绿灯亮/绿灯闪烁),
PoE powering (黄灯亮), SFPport: Link (绿灯亮)

千兆以太网端口1 ~ 4

Alternative-A(Data Pair Power feeding): Port 1~4 , V+ (3,6) V- (1,2)

IEEE 802.3af和IEEE 802.3at 2-Event

每端口最高输出30W，整机输出功率最高110W（75°C）
PoE在75°C/95%温湿度环境下:
DC 12V/ 60W (Maximum) output, Inrush current 7.53A DC 24V/ 110W (Maximum) output, Inrush current 6.01A DC 36V/ 110W (Maximum) output, inrush current 3.68A                              

DC 12V或DC 24V, 输入范围: DC12~36V
极性反接保护和过流保护

10 Watts / DC 24V(75°C环境温度无PoE负载)

金属外壳满足IP30工业防护等级

EN50022 DIN导轨安装

144mm (H) x 55 mm (W) x 105mm (D)
                              (不含导轨夹)

0.8 Kg不含包装

40~75°C / 110W PoE loading (DC 24V/ 36V)

0% ~ 95%, 无凝露

-40 ~ 80°C

满足IEC 60950-1
电源外壳间，网口外壳间DC 2.12KV Hi-pot 隔离保护

IEC/EN 61000-6-4, CISPR 16-1-2/ -2-1/-2-3, CISPR 22, FCC ClassA, C

IEC/EN 61000-6-2
                              IEC 61000-4-2 ESD: Contact 6KV /Air Con. 8KV IEC 61000-4-3 RS: 80M~1Ghz /20V, 1.4~2Ghz/3V, 2~2.7Ghz /1V
                              IEC 61000-4-4 EFT: L-L/L-N 2KV, Signal 2KV
                              IEC 61000-4-5 Surge: L-L/1KV, L-N/2KV, Signal I/O 1KV
                              IEC 61000-4-6 CS: 0.15M~80Mhz / 10V
                              IEC 61000-4-8 PFMF: 30A/m Cont. 300A/m 1~3S.

IEC /EN 60068-2-6 vibration: 10~150Hz, 20m/s2 (2.04g), 20 sweeps / per axis.
                              IEC /EN 60068-2-27 shock: 50g acceleration, 11ms duration, Half –Sine wave